- Individual switch profiles are only available for HF8R Signature (included) or after upgrade for HF8R Core and HF8R Work.
- The main switch of the HF8R can be individually programmed with switch profiles according to the user’s needs in terms of scope and composition of all available light functions and pre-defined intervals.
- The light functions of an individual switch profile can always be selected by using the power switch of the lamp.
- After programming and sending the individual switch profile for the power switch to the lamp, it is stored, as long as the switch profile is not changed/replaced by a new switch profile via app.
- The direct red light/RGB activation from off mode via main switch always works, independently from any individual power switch programming and even if no red light function has been assigned to a stored switch profile.
- As a default switch profile, the following light functions will be preinstalled for first use, but can be changed afterwards: Adaptive Light Beam -> white light (low power) -> white light (mid power) -> white light (power) -> blink (blink for HF8R Signature only). In addition the special function Boost is set. This default setting can always be restored by keep pushing the power switch of the HF8R for 8 sec. or via app (select “Factory reset” in “Device Settings”).