- Select/click on one of 8 possible switch profile slots.
- The name of the switch profile can be changed by clicking into the text field. If the name is not changed, the automatically assigned default name will remain.
- If desired, assign Double Click with a special function: Click on the pen symbol or the text field in the Double Click line and choose from “Not assigned” (no special function, default setting for new switch-profiles), “Boost” and “Tactical Strobe”. With any special function assigned to Double Click, two quick consecutive clicks on the physical main switch of the lamp (<0.5 sec) will activate the special function directly, no matter if any other light function has been active or the light has been turned off. When no special function has been set for Double Click (= ”Not assigned”), a double click will prompt the lamp to cycle through the light functions of the active switch profile. When boost is set as special function and activated via double click, it will run for maximum 1 minute, but it can also be deactivated again by a single click on any switch before the 1 minute period passed by. When Tactical Strobe is active, it will keep running until it is deactivated by a single click on any switch (no 1 minute limit). When any special function is deactivated by any click on any switch, the lamp returns to the light function that has been active before.
- Click on any of the 6 light function slots under “compose switch profile” to add a light function. Each slot reflects one single click on the physical main switch. The top -> down hierarchy of slots shown in the app reflects the chronological order of what happens when using the physical main switch). Example: when the light function selected in the uppermost slot is 70% white light, 70% white light will be activated when using the physical main switch 1 x from off mode. When in the second slot below the uppermost slot white light blink is selected, 2 consecutive clicks (> 0.5 sec. ) from off mode will activate white light blink. The slots can be moved up or down with the up or down arrows next to the slots to change the switch profile sequence. After clicking on one of the slots, a window opens with the following functionalities in menus and submenus to choose from (for this specific slot within a switch profile):
- White Light
- Power
- Mid Power
- Low Power
- Individual -> stepless output selection via fader
- Focus: -> selection via fader
- Interval settings (optional):
- White Light
A preset and stored interval can be added. The interval is valid for the selected light function and only for the associated slot.
- Red Light (HF8R Core/Work) or Multi Color Light (HF8R Signature)
- Interval settings (optional):
A preset and stored interval can be added. The interval is valid for the selected light function and only for the associated slot.
- Blink
- Adaptive Light Beam
- Interval settings (optional):
A preset and stored interval can be added. The interval is valid for the selected light function and only for the associated slot.
- Light Patter Control
- Interval settings (optional):
A preset and stored interval can be added. The interval is valid for the selected light function and only for the associated slot.
- When a newly created or changed profile is saved and sent to the lamp, a successful transmission is indicated by 2x blinking.