- The factory reset can be used to restore factory settings of the switch profile for the power switch, including special functions. Any individual setting, timer and switch profile and timer will be deleted from the lamp and the original default factory settings will be restored: Adaptive Light Beam -> white light (low power) -> white light (mid power) -> white light (power) -> blink (blink for HF8R Signature only). Individual switch profiles can be restored via app anytime. The factory reset may also be applied in case of an unexpected failure.
- Activate factory setting:
- By main switch of lamp: Keep pushing the power switch for 8 sec until the lamp blinks 2x.
- By Ledlenser Connect App: Connect the smartphone/app with the lamp, go to “further functions”, then to “Device settings” and select “Reset” under “Factory Reset”. A warning appears: “Do you really want to restore factory settings? The currently stored switch profile and active timer will be deleted”. Click on “Reset”. The lamp will blink 2 x to confirm restoration of the original default factory setting.
- By Remote Control: Not possible with this device.