- Connection range: Up to 100 meter in open space. When maximum range is exceeded, the lamp automatically disconnects
- Location services of the smartphone have to be set to work.
- Detailed ML6 Connect Bluetooth function turn on/off information: Each time the lamp is turned on via the physical power switch or “+”/”-“ (direct red light activation) in any light function, Bluetooth function of ML6 Connect is activated. The lamp now remains ready for connection with the smartphone via Ledlenser Connect App or for operation via remote control as long as the lamp is on. When the lamp is turned off via app, switch or remote control and disconnected from smartphone, the Bluetooth function will be set to standby mode for 50 hours. In standby mode the lamp can be reconnected with smartphone or turned on by remote control without using any switch of the lamp again, but with slower reaction time. Once the connection is reestablished or the lamp is turned on again, reaction time is back to normal. When no connection with the lamp has been established within the 50 hours standby time period, Bluetooth function will be deactivated and the lamp will not be available for connection or remote control operation anymore. For reconnection or remote control operation the lamp has to be turned on via physical power switch again.
- Connection/Disconnection indication and other activity indications: The red light of the lamp will blink 2x when it connects/disconnects with smartphone, profiles are sent to the lamp, or on/off timer are activated.
- The app always starts with the connection screen. Once it is connected, it will open the main menu.
- Help text in app:
- Start screen (for all Ledlenser lamps compatible with Ledlenser Connect App): “Turn on lamp to establish connection with app and click on “Connect”. Close app to disconnect.”
ML6 Connect specific advisory text shown directly after the first time a connection has been established with ML6 Connect (will not be automatically shown again, can be read again in help text): “Connection or disconnection is indicated by flashing red light. Close app to disconnect. After turning off the lantern the Bluetooth function will remain in standby mode for 50 hours. During standby mode connection and operation with app and remote control is possible without manually turning on the lantern via main switch. “