- Select/click on one of 8 possible switch profile slots.
- The name of the switch profile can be changed by clicking into the text field. If the name is not changed, the automatically assigned default name will remain.
- If desired, assign Double Click with a special function: Click on the pen symbol or the text field in the Double Click line and choose from “Not assigned” (no special function, default setting for new switch-profiles), “Boost” and “Tactical Strobe”. With any special function assigned to Double Click, two quick consecutive clicks on the physical main switch of the lamp (<0.5 sec) will activate the special function directly, no matter if any other light function has been active or the light has been turned off. When no special function has been set for Double Click (= ”Not assigned”), a double click will prompt the lamp to cycle through the light functions of the active switch profile. When boost is set as special function and activated via double click, it will run for maximum 1 minute, but it can also be deactivated again by a single click on any switch before the 1 minute period passed by. When Tactical Strobe is active, it will keep running until it is deactivated by a single click on any switch (no 1 minute limit). When any special function is deactivated by any click on any switch, the lamp returns to the light function that has been active before.
- Help text in app for double click function: “Via the Double click function the special function can be activated at any time”
- Click on any of the 6 light function slots under “compose switch profile” to add a light function. Each slot reflects one single click on the physical main switch. The top -> down hierarchy of slots shown in the app reflects the chronological order of what happens when using the physical main switch). Example: when the light function selected in the uppermost slot is 70% red light, 70% red light will be activated when using the physical main switch 1 x from off mode. When in the second slot below the uppermost slot white light blink is selected, 2 consecutive clicks (> 0.5 sec. ) from off mode will activate white light blink. The slots can be moved up or down with the up or down arrows next to the slots to change the switch profile sequence. After clicking on one of the slots, a window opens with the following functionalities in menus and submenus to choose from (for this specific slot within a switch profile):
- White Light
- Power
- Mid Power
- Low Power
- Individual -> stepless output selection via fader
- Interval settings (optional):
- White Light
A preset and stored interval can be added. The interval is valid for the selected white light output and only for the associated slot.
- Red Light
- Power
- Mid Power
- Low Power
- Individual -> stepless output selection via fader
- Interval settings (optional):
A preset and stored interval can be added. The interval is valid for the selected red light output and only for the associated slot.
- Blink (white or red)
- Blink
- Position
- Pulse
- SOS
- Alpine Distress Signal
- When a newly created or changed profile is saved and sent to the lamp, a successful transmission is indicated by 2 x red light blinking.
- Help text in app:
- Profile help text in app for profile selection: “Program the witch of the lamp with individually created sequences of light functions. Up to eight switch profiles can be created, e.g. for different activities. To create a switch profile, tap on the switch profile slots. Tap and hold to send switch profile to lamp or for further options. Flashing red light indicates successful transmission to lamp.”
- Profile help text in app for profile creation: “A switch profile can be composed of up to six individually selected light functions. After sending the profile to the lamp, the light functions can be activated in the desired order by using the power switch of the lamp. Intervals that have been created and stored before can be assigned to single light functions. Special light functions such as Boost or Tactical Strobe can be assigned to each profile by using the Double Click function. 2 quick consecutive clicks on the switch of the lamp will activate the special function.”