- The lamp can be prompted to blink (= go off and on again) repetitively to indicate that a certain time interval has passed by. For example: in a 10 minutes interval the lamp will blink (= go off and on again) every 10 minutes repetitively.
- Possible interval time span between two blinks: 1-60 minutes.
- The interval function only works, when the light function, for which the interval has been selected, is running.
- The interval function works with all continuous light functions. It does not work with SOS, Alpine Distress Signal and red or white blink functions.
- The interval function must always be associated with a light function within a switch-profile that has been individually composed by the user and sent to the lamp upfront and it can then only be activated and deactivated together with the associated light function by using the physical power switch. It cannot be activated/operated directly via app in real time (see “How to set up and activate interval”).
- Once the interval has been interruption by turning off lamp, changing light function, activate boost function via “+” switch or activating a special function via power switch, the interval will start again from the beginning, when the associated light function is selected again or the boost/special function ends. Dimming light will not lead to interval interruption.
- The Interval function works together with any dimming activity via “+” or “-“. E.g. when the “+” switch is used to increase brightness and at the same time when an interval blink takes place, the light dimming activity can be continued while the lamp blinks according to the interval.
- Interval help text in App: “When interval is activated, the lamp will shortly blink every time a selected time interval is over (1-60 minutes). The cycle repeats continuously until the associated light function has been turned off. Smart Blink will prompt the lamp to blink in a cumulative order. Example: lamp will blink 1x after 10 minutes, 2x after 20 minutes etc. To use a selected interval, please store it. Afterwards go to switch profiles and assign the interval to any light function. Intervals cannot be used without switch profiles.“