- Ways of using the switch: single click (push and release), double click (push and release 2 x shortly within 0.5 seconds), keep switch pushed (push and not release for a certain time). The different ways of using the switch are associated with different functionalities.
- General switch/app logic: Direct Control overrides switch and vice versa, also when lamp is connected with app.
- Direct turning off and memory function: When a light function (any basic lamp mode) is selected via the physical switch, any further click on the physical switch within 5 secs will prompt the lamp to cycle to the next light function (or to turn off, when the end of the switch program sequence is reached). Any further click on the physical switch after 5 seconds pause will prompt the lamp to turn off directly. In this case turning on the lamp again will result in activating the last set light function, thanks to the memory function.