- Select/click on one of 8 possible switch profile slots.
- The name of the switch profile can be changed by clicking into the text field (names that already exist cannot be selected twice). If the name is not changed, the automatically assigned default name will remain.
- If desired, assign Double Click with a special function:
Click on the pen symbol or the text field in the Double Click line and choose from “Not assigned” (no special function, default setting for new switch-profiles), special function “Boost” or special function “Strobe”. With one of the two special functions assigned to Double Click, two quick consecutive clicks on the physical switch of the lamp (<0.5 sec) will activate the special function directly, no matter if any other light function has been active before or the lamp has been switched off (as long as basic mode 1 has been set). - When no special function has been set for Double Click (=”Not assigned”), quickly using the physical switch of the lamp will allow fast cycling through the individually composed switch profile in basic mode 1.
- When boost is set as special function and activated via double click, it will run for maximum 10 seconds, but it can also be deactivated again by a single click on the physical switch before the 10 seconds have passed by.
- When boost is deactivated, the lamp returns to the light function that has been active before or switch off again.
- When strobe is set as special function and activated via double click, it will keep running until it is deactivated by a single click on the physical switch (no 10 seconds limit).
- When strobe is deactivated, the lamp returns to the light function that has been active before or switch off again.
Profile help text in app for double click function: Via the Double click function the special function can be activated at any time. Click on any of the 6 light function slots under “compose switch profile” to add a light function. Each slot reflects one single click on the physical switch. The top -> down hierarchy of slots shown in the app reflects the physical switch sequence (chronological order of what happens when using the physical switch).
Example: when the light function selected in the uppermost slot is red light mode, red light will be activated when using the physical switch 1 x from off mode. When in the second slot below the uppermost slot Energy Saving Low Power is selected, 2 consecutive clicks (<5 secs or 0.5 < 5 secs; depending on assignment of special function like boost mode) from off mode will activate Energy Saving Low Power go on.
The slots can be moved up or down with the up or down arrows next to the slots to change the switch profile sequence. After clicking on one of the slots, a window opens with the following functionalities in menus and submenus to choose from (for this specific slot within a switch profile):
- Energy Saving
- Power
- Mid Power
- Low Power
- Interval settings (optional): A preset and stored interval can be added. The interval is valid for the selected Energy Saving output mode and only for the associated slot.
- Constant Light
- High
- Middle
- Low
- Individual -> stepless output selection via fader
- Interval settings (optional): A preset and stored interval can be added. The interval is valid for the selected Constant Light output mode and only for the associated slot.
- Blink
- Multicolor Light
- Red
- Green
- Blue
- Interval settings (optional): A preset and stored interval can be added. The interval is valid for the selected multicolor light function and only for the associated slot.
- Optisense
- Interval settings (optional): A preset and stored interval can be added. The interval is valid for Optisense and only for the associated slot.
When a newly created or changed profile is saved and sent to the lamp, a successful transmission is indicated by 2 x blinking green LED