- The lamp can be prompted to blink (= go off and on again) repetitively to indicate that a certain time interval has passed by. For example: in a 10 minutes interval the lamp will blink (= go off and on again) every 10 minutes repetitively.
- Possible interval time span: 1-60 minutes.
- The interval function only works, when the light function, for which the interval has been selected, is running.
- The interval function works with all light modes except for SOS and Blink.
- The interval function must always be associated to a light function within a switch-profile that has been individually composed by the user and sent to the lamp upfront and it can then only be activated and deactivated by using the physical switch in mode 1 (by turning on or off the light function to which the interval has been assigned). It cannot be activated/operated directly via app in real time (see “How to set up and activate interval”).
- Once the interval has been disrupted (switch off lamp, change mode/light function), the interval will start again from the beginning.
Interval help text in App: When interval is activated, the lamp will shortly blink every time a selected time interval is over (1-60 minutes). The cycle repeats continuously until the associated light function has been turned off. Smart Blink will prompt the lamp to blink in a cumulative order.
Example: lamp will blink 1x after 10 minutes, 2x after 20 minutes etc. To use a selected interval, please store it. Afterwards go to switch profiles and assign the interval to any light function. Intervals cannot be used without switch profiles.